Price: $35.99 - $29.99
(as of Sep 22, 2024 23:26:58 UTC – Details)
Product Description
30A Solar Charge Controller
1.Build-in industrial micro controller.
2.Big LCD display, Dual USB output
3.Fully PWM charge management.
4.Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5.Dual mosfet Reverse current protection ,low heat production.
6.Supports lead-acid batteries, gel batteries and lithium phosphate batteries.
Product – Parameters
MODEL :DZ-SCC-30Battery voltage :12V/24V autoCharge current :30ADischarge current :30AMax Solar input :<50VCharge voltage :13.7VDischarge stop :10.7VDischarge reconnect :12.6VUSB output :5V/2A
Self-consume :<15mAOperating temperature :-20~+60 ℃Size/Weight :138*85*30mm /150gInstall hole size :124*50mm
How to install it?
1. Connect the battery
2. Connect solar panels
3. Connected load
4. Form a complete system
SAFETY INSTRUCTIONS
<1>Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
<2>The battery cable should be as short as possible to minimize loss.
<3>The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
<4>Please install according to the correct connection sequence, incorrect sequence may damage the controller
<5>Reverse order connection applies to uninstall
Error Display
E01-Battery Low Voltage Check if the PV input voltage or the battery voltage fit the pre-set voltage of the controller. If not, press the button once to return to main screen, and correct the voltage following the setting method of “MENU 01” above. E02-Battery High Voltage Check if the PV input voltage or the battery voltage fit the pre-set voltage of the controller. If not, press the button once to return to main screen, and correct the voltage following the selling method of “MENU 01” above. E03-Output Over Current Load current exceed rated current.if it does not resume within 60 seconds,it will turn into E04 warning. Press button to ignore for one time and force to work again. E04-Output Short-Circuit Output automatic disable when there is a short-circuit and will resume after 10 seconds. Press button to ignore for one time and force to work again. E05-High Temperature When the temperature of the controller exceeds 80°C, it will enter stand-by mode and stop charging or discharging until the temperature falls to 70°C. Press button to ignore for one time and force to work again. E06-PV Over-Voltage In order to protect the internal circuit,Charging automatic stop when PV voltage exceed 50V and automatic recover when voltage drop below 45V.(for I 2V/24V system)
[ 30A Solar Charge controller ]: the solar charger controller compatibility with 12V 24V system. Discharge Current: 10A,build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone chargeing[ Multiple Protection Functions ]: ECO-WORTHY solar controller has short-circuit protection, open-circuit protection,reverse protection, over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery[ Battery Type ]: The charge regulator is suitable for lead-acid batteries, gel batteries and lithium phosphate batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically[ LCD Display ]: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc[ Easy to Install and Operate ]: The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production. ( Note: The charge controller will heat up when it is running. Please be careful to install the charger controller on a flat, well-ventilated place)Customers say
Customers like the functionality, reliability, and value of the controller. They mention it works well for beginners, is a quality product, and is able to perform as expected. Some are happy with the value for money. However, some customers have reported that the controller gets very hot at the top and throttles down the amps. They also have issues with the shut down mode. Opinions are mixed on the charge quality and ease of setup.
AI-generated from the text of customer reviews
Reviews
There are no reviews yet.